"Our new Ridata SSD offers consistent high performance in the variety of environments photographers face," remarked Harvey Liu, Advanced Media President. "Compared to a traditional HDD the Ridata SSD is smaller; uses half as much power; is ultra lightweight; offers incredibly fast boot and access times; and operates at a low temperature with no mechanically moving parts. It is the ideal HDD replacement for laptops or as an external storage drive via an optional aluminum case," Liu added.
It reduces boot up and seek times to seconds compared to conventional hard disk drives. Users can install new software programs in seconds rather than minutes. The data transfer rates are 60MB/s for maximum sequential read and 48MB/s for maximum sequential write. It requires a five-volt power supply and because of its low power consumption will dramatically extend user time on a laptop or other mobile computing application.
SSD Drives are inherently resistant to vibration, shock andtemperature extremes. The RoHS compliant drive is very reliable with more than 4,000,000 hours Mean Time Between Failures (MTBF). This level of durability reduces IT labor costs, and the danger of losing critical data. Data integrity is further supported by dynamic wearing leveling and a built-in ECC that corrects up to 3 random 12-bit symbols (Reed Soloman-4) of error per 512-byte sector. With a write endurance cycle (P/E) of more than 2,000,000 times these drives are built to safely write and store critical data.
Featuring no moving parts, the Ridata SSD SATA 2.5 inch drive meets bus interface industry standard Serial ATA (SATA) so there are no host compatibility or upgrading issues. The drive produces virtually no noise, no heat generation, and no vibration, while offering reliable temperature (0 to 70C) and humidity resistance that assures long-lasting data storage. It is engineered with semiconductor components and uses fast Single Level Cell (SLC) NAND flash memory. The 2.5" 32 GB drive weighs 64.5 grams with dimensions of 101.85 x 69.85 x 9mm.
Ridata is currently developing a variety of 2.5" SATA and 1.8" IDE based SSD cards with capacities and interfaces for every need. As with other Ridata products, these will be available through system integrators, selected retailers and Ridata distributors.