EventDV.net
Search EventDV

EVENT-DV 25
2010 Awards Show
2009 All-Star Team
2008 All-Star Team
2007 All-Star Team
2006 All-Star Team


RELATED SITES
Streaming Media Producer
OnlineVideo.net
Streaming Media
EMediaLive Archive


PRIVACY/COOKIES









Copyright © 2004 -
Information Today, Inc.



Review: Pioneer PRV-LX1 DVD Recorder
Posted Jul 1, 2003 - January/February 2005 Issue Print Version     Page 1of 2 next »
  

Because it does direct-to-disc recording and so much more, Pioneer's PRV-LX1 ($3995) is a natural. It has professional I/O, can do pro-level encoding straight from an NLE, camcorder or field deck, and can add custom menus on projects, and its straightforwardness is huge. Even an unpolished first-generation user interface can't stop the LX1 from making DVD authoring unusually facile. As either a gateway to DVD-Video for professional print-to-tapers or a down and not-so-dirty get 'em out the door offloading system for experienced DVD authors, look for the LX1 to burn a blazing trail.


July 2003|To video professionals accustomed to outputting finished projects to tape, "authoring" can sound as foreign as writing a book, or at least as bothersome as writing the narration-track text to a corporate promo piece. Or perhaps "authoring" foreshadows the burden of learning a new and potentially complicated skill set just to deliver something as polished as a tape master. Refreshingly, Pioneer's new PRV-LX1—a standalone MPEG-2 encoder and DVD authoring box posing as a video tape recorder (VTR)—may yet assuage those fears by bringing fast and easy DVD disc creation, complete with elegant menus, to tape-centric, nose-to-the-grindstone video producers.

We tested a Beta version of the PRV-LX1 (due to ship in June 2003) to find out if its warm debut reception in April at NAB was the result of sharp images and efficient burning or just smoke and mirrors. At just $3,995, the prospect of high-quality, real-time encoding combined with almost pain-free authoring has obvious appeal, but can "authoring" ever be as easy as printing to tape? The LX1 comes tantalizingly close. Apple won't be hiring any LX1 user interface designers, but not even haphazard UI organization can make building DVDs much harder than designing labels for old VHS window dubs. Make space in your rack; digital delivery just got a lot easier.

Built to Blend in
Our test unit was a Beta version, but Pioneer asserts that its features were 99% finalized, save the addition of a full User's Manual that we did not have to critique. Physically, the chassis was as it will be; a BetacamSP-sized (only lighter!), rack-mountable, deck-like device with backlit buttons (Play, Stop, Pause, Fast Forward, Reverse, Scan, and Record) and LED readouts on the front and standard video I/O on the back. It makes a clear statement that the LX1 is ready to fit into your current workflow.

The LX1 has the standard fare for connections: 3X BNC component (in/out), S-Video (in/out), and BNC composite (in/out), as well as both balanced and unbalanced audio jacks (in/out). There's Black Burst (in/out), and LTC in and RS-422 for external control and ECL batch support. For digital input, Pioneer includes a DV via 4-pin FireWire and is planning an SDI/AES EBU option for later this year.

Less familiarly, there are four USB ports (two in both the front and back) for connecting a mouse and keyboard, a VGA port, and a couple of other I/O surprises. First, the inputs feed an MPEG-2 hardware encoder, while the outputs show the decoded MPEG-2 files with a four-second delay (latency is to be expected for MPEG encode/decode, but that's very long). Therefore, an otherwise straightforward incoming source pass-through would require an internal DA and a second set of outputs and doesn't exist on the LX1, save with composite source. That's only a problem if your source doesn't have a monitor attached to it. Secondly, the video output toggles between the MPEG decode and the LX1's user interface. That VGA port is only for service repair or programming, rather than for a dedicated UI monitor. It would be nice to have that option, but Pioneer deserves credit for streamlining the minimum configuration.

Instead of a tape drive, the LX1's front has two drive bays for Pioneer DVR-A05 DVD-R/RW burners and there's a 120GB hard drive inside. In the standard one-burner configuration, the right bay will have just a faceplate. The two-burner version (add $495) supports simultaneous burning if, for example, you regularly burn a delivery copy and an archival copy at one time. It can also copy a non-copy-protected DVD disc. The LX1 supports encoding directly to one or both recorders or to the hard drive, or even to the HDD and one burner simultaneously. Wherever you encode, you'll still have the ability to add a custom menu to the project after you've finished recording the media: a tremendous feature for real-time archival and/or distribution of presentations, digital dailies, and just the fast pace of production work. (See Geoff Daily's "Daily Planet," www.emedialive.com/r18/2003/daily0603.html, pp. 18-25 for more on digital dailies and DVD.)

How do you record video and audio to the LX1? Same as with a deck: hit the Record button on the front. (You can actually configure "Record" for direct recording or to Standby-Record where the first touch engages Standby mode and the second touch of Record starts it.) Naturally, with an encoder rather than a tape deck, there are set-up parameters—such as input, bit rate, set-up level, Audio (Dolby or PCM), etc.—and all are accessed through the UI by familiar DVD navigation arrows and Enter, also on the unit's front. Or you can use the USB keyboard and mouse.

And that interface? It has a utilitarian flair that evokes an engineer who sat down with a list of features that wasn't really in any order. The layout makes more sense if you appreciate the limitations of navigation arrows. With a mouse, there is an awkward collection of single clicks, double clicks, and even a keyboard "Enter" in one place to avoid not saving choices. Still, there's little that's intuitive. Four main hierarchical groups are almost meaninglessly labeled "Edit," "App," "Set-up," and "Status." Set-up parameters are dispersed among Edit, Set-up, and Status, and because the interface changes so much as you drill down, it's hard to know where you are, especially because the entire Status group is positioned as if it were a subdirectory. And "Edit" what? There's no clip-trimming in the LX1, it's menu creation and DVD project set-up. "App" is a disc-copying utility and batch capture conveniently(?) grouped together. Bluntly put, there is no visual workflow. There are also several setting annoyances like a First Play default of "do nothing" rather than "play menu" or first title, so you have to set it each time.



EventDV Spotlight is now:
Email:
more info
more info

Print Version   Page 1of 2 next »